please select HUIYUE transformer bushing auto through machine manufacturer.

Dongguan Hui technology combined with the new and old customers reflected in the use of our time, you may encounter the following six kinds of situations:

    1, press the start button, the motor does not turn
    2, line count, but not exclusively, and after boot, cable rack normal reset operation
    3, the number of turns than the set value

    4. Do not reset after around
    5, does not automatically start
    6, around the end reset, a waste of time

Combining these six kinds of circumstances, more technology-hui to tell you about the six kinds of treatment:
 

Case 1: It may be due to the motor speed is too low, can not overcome the resistance of the line after the band. In this case, you can try to increase the low percentage. It may be because the frequency protection, low voltage protection, overcurrent protection and makes the motor does not work out. If so, you can try turning off the power, check the power supply voltage and the external load, make sure no problem and then turn on the power.

Case 2: It may be because you set the diameter or width of zero or when the cable starting from the inside out around the point + width> stroke or cable inside the cable from the outer width> from around the point, you can Set the correct diameter or width. Also may be due to errors in the way the cable set, which requires you to set the correct cable way.

 

Case 3: may be due to the low speed fast, so you want to reduce low percentage. It may be because too little pre-stop laps, you can increase the pre-stop laps.

Case 4: It may be that you will automatically reset items set to zero, then you will need to automatically reset key to 1.

 

Case 5: This paragraph may be due to automatic starting item is set to zero, you can automatically start entry to 1, and then debug it.

6th case: It may be that you will reset the number of times the user parameters set to 1, in which case you can reset times set to a larger value.

More CNC Winder technology news, long-term focus of Dongguan Hui more technology, our company will continue to update technical information.

Source：HUITUE transformer bushing auto through machine Manufacturers