please select HUIYUE transformer bushing auto through machine manufacturer.

Our machine is suitable for monochrome color casing sleeve, black casing, two-pronged approach, while wearing a black and white casing, single color, two color, two-color, three-color, four-color, this product is suitable for diameter between 0.1 to 0.7, equal to the number in the rain wearing a sleeve process 200 shares of the following products. Select casing principles: the casing diameter ≥ strands of warp + 0.12mm, that the Li Gong Hui today to tell you about our automatic machine copper sleeve bushing wear common debugging methods:

There are color casing machine CNC controller on a "Debug" button when using the device for debugging, select "Debug" to enter debug interface, you can view the action on each step and analyzed. Debugging actions have "into the pipe, pressure pipe, pipe cutting, a shift on the line, clamp the line, loose tube loose line, shift on the tube, tangent, cramping back line."

Copper casing color casing machine commonly used debugging method:

1, into the "debug", press "into the tube" into the pipe clamps can state at this time, you can by hand pressure pipe silicone round the top open, loose tube in the state. Then, hand push-push A, B casing, test, and adjust the width briquetting, left position, so that the sleeve can be smooth, not wandering into the clamp slot.

2. After entering the pressure tube slot, press the "pressure pipe", then "cut pipe", then "shift on the line." In this case, the pressure line by hand wheel to open the top, in a loose line status, and then push the way he pushed copper, test, and adjust the right position so that copper can flow into the inner sleeve to ensure accurate location. (Note: After the left and right position of the adjustment screws, locking screws in the locked position will change over debugged, therefore, after the latch, once again re-commissioning the above, to ensure that the correct position is not changed)

For more Division I Dongguan Hui color casing machine more technical information, please click our online customer service or call 15016888545 Young R Here are a copper wire and casing size table
Source：HUITUE transformer bushing auto through machine Manufacturers