please select HUIYUE transformer bushing auto through machine manufacturer.

Hui Zhang Gong today to get more technology customer samples, three 0.7 triple insulated wire, with 14L Teflon tube, because three 0.7 triple insulated wire is relatively large, the required accuracy is very high, by Zhang Gong debugging Division I HY-R20 automatically through the casing machine can use three 0.7mm insulated wire through the casing cover 14L Tiefo, please watch the following video, that let's look at our HY-R20 casing machine features:

 

By Zhang Gong continue to observe its 0.7mm three insulated wire through the casing in the stability of automatic machine operation, HY-R20 automatically through the casing machine observe two days of uninterrupted operation, its operation is very smooth, very stable, functioning During the Division I constantly test, were set two short sleeve 14L operation and functioning of the single with the casing, as well as the whole tangent point line operation, please check under the already video

 

HY-R20 automatically through the casing machine - Features:

1, the microcomputer control, easy to operate.
2, the entire Chinese CNC MCU control display
3, the sleeve length size adjustable, accurate dimensions.
4, copper adjustable, for most wear bushing transformer production.
5, with CNC easy to use, quick, quality assurance, and improve productivity.
6, the sleeve length can be arbitrarily set, the whole story ends can be selected.
7, this machine can automatically through the casing at the second delivery pipe.
8, this machine is suitable for any brand of firing line, can be installed directly use. Very convenient.
9, very powerful: automatic feeding tube, automatically cut off, automatic wear sleeve.
10, lead automatically sent, auto-complete the job through the casing.

 
Yue Hui Li Gong specifically reminded: If you buy some quality time off, but automatic through the casing machine manufacturers, because the line is very thick, and very large, it will send the wire through the casing in the past, reel tape does not move, it will appears the line is not in place within a line and return line port, the feeding port where the tie, after a failure, and the need to wear bushing machine automatically re-commissioning and re-threading, which greatly affected the efficiency, Huawei recently under Dongguan Dazhong Electronics Division I signed the 100 HY-R20 automatically through the casing machines, please view http://www.cnhuiyue.com/case/case118.html
 
Just start debugging:

Two short sleeve 14L works:

Single Casing works:

The whole operation of the tangent point line

Article Source：HUIYUE transformer bushing auto through machine Manufacturers